Capita Navigator
CAMBER TYPE:
NEW! ALPINE V1 PROFILE
The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.
NOSE
TAIL
ADDITIVES:
2 X 30 MM CARBON FIBER BEAMS
NOSE
TAIL
|
LENGTH | EFFECTIVE EDGE (MM) | WAIST | NOSE/TAIL | TAPER (MM) | SIDECUT | MAX STANCE (CM/INCHES) | SUGGESTED WEIGHT (LBS/KG) |
---|---|---|---|---|---|---|---|
NEW! 147 | 1110 | 24.1 | 28.7 / 27.8 | 8.8 | 7.30 / 6.20 / 7.30 | 58.8 / 23.2 | 90-140 / 40-63 |
NEW! 151 | 1140 | 24.5 | 29.3 / 28.3 | 9.8 | 7.50 / 6.40 / 7.50 | 61.3 / 24.2 | 110-160 / 59-73 |
NEW! 155 | 1182 | 25.2 | 30.1 / 29.0 | 11.6 | 8.00 / 6.80 / 8.00 | 61.3 / 24.2 | 130-190 / 59-86 |
NEW! 158 | 1195 | 25.6 | 30.5 / 29.3 | 11.8 | 8.10 / 7.00 / 8.10 | 63.9 / 25.2 | 150-200 / 68-90 |
NEW! 161 | 1222 | 26.0 | 31.0 / 29.7 | 12.9 | 8.30 / 7.20 / 8.30 | 63.9 / 25.2 | 160-210 / 72-95 |
NEW! 164 | 1238 | 26.4 | 31.5 / 30.1 | 13.9 | 8.50 / 7.40 / 8.50 | 66.4 / 26.2 | 170-220+ / 77-110+ |