Capita Black Snowboard of Death
RIDER TYPE:
THE ADVANCED ALL MOUNTAIN TECHNICIAN
FLEX:
SOFT
STIFF
CAMBER TYPE:
ALPINE V1 PROFILE
The original ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow.
NOSE
TAIL
ADDITIVES:
NEW! 2 X EMBEDDED FORGED CARBON RODS + NEW! 4 X 30 MM AMPLITEX™ AMPLIFIERS + CARBON FLEECE POWER SHIELD™
NOSE
TAIL
TECH:
NEW! FSC® CERTIFIED FC HOVER CORE™
An energetic core that is extremely light and strong with excellent dampening properties. Reinforced with twin FORGED CARBON rods.
CARBON FLEECE POWER SHIELD™
Mixed material technical weave yields an optimal blend of performance and strength.
NEW! AMPLITEX™ V-TECH AMPLIFIER
Grid woven tech tape featuring the response of carbon with the dampness of flax.
NEW!HOLYSHEET™ TRI/TRI FIBERGLASS
+MAGIC BEAN™ RESIN
Triax/Triax HOLYSHEET™ has higher glass to weight ratio than normal fiberglass. Impregnated with high performance plant based MAGIC BEAN™ RESIN for the most powerful and dynamic ride.
NEW! HYPERDRIVE™ BASE
Exclusively formulated, sintered, ultra-high molecular weight, ultra-high density polyethylene, custom engineered with special additives. Rated for the most depraved speed junkies ONLY.
MOONSHOT PRO-TUNE™
Aftermarket performance stone grind structure straight from The Mothership.
- Multitech™ Level 5 DeepSpace™Metallic Silkscreen + PAM16000™ Topsheet w/ Metallic Underlay
- Multitech™ Sublimation + Die-cut Base
- PLT Topsheet Technology™
- 360 Degree HRC48 Steel Edges
- Full ABS1000 Sidewalls
- Stainless Steel 4 x 2 Inserts
- Titanal Base Inlay
AWARDS
| LENGTH | EFFECTIVE EDGE | WAIST | NOSE/TAIL | TAPER | SIDECUT | MAX STANCE (CM/INCHES) | SUGGESTED WEIGHT (LBS/KG) |
|---|---|---|---|---|---|---|---|
| 156 | 120.2 | 25.3 | 30.0 / 29.9 | 0.03 | 8.40 / 8.20 / 7.80 | 62.4 / 24.6 | 130-190 / 59-86 |
| 159 | 122.5 | 25.6 | 30.3 / 30.2 | 0.03 | 8.50 / 8.20 / 7.90 | 63.5 / 25.0 | 140-200 / 63-90 |
| 162 | 124.8 | 25.9 | 30.7 / 30.6 | 0.03 | 8.60 / 8.40 / 8.10 | 64.5 / 25.4 | 150-210 / 68-95 |
| 165 | 127.1 | 26.2 | 31.1 / 31.0 | 0.03 | 8.70 / 8.50 / 8.30 | 65.6 / 25.8 | 160-220+ / 72-100+ |